Three-Party Conference Call; Setting The Dial Mode; Setting The Flash Time; Setting The Area Code - Motorola L512CBT User Manual

4.19.3 Three-party conference call

1. During an external home call, press MENU.
Your caller is put on hold.
2. Press VOL+ or REDIAL/VOL- to select the
cordless handset or corded base you want to call.
3. Press MENU to make the call.
4. When the other cordless handset or the corded
base answers the intercom call, press MENU on
the calling handset to set up the conference call.
5. Press /BACK on any cordless handset to
hang up three-party conference and leave the other
cordless handset or corded base engaged with the
caller.
4.20

Setting the dial mode

The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to
SETUP BS
select .
2. Press MENU to select
3. Press MENU and VOL+ or REDIAL/VOL- to select
TONE PULSE
or .
4. Press MENU to save.
44
DIAL MODE
.
NOTE
If pulse mode is selected, press TONE/* to switch from
pulse to tone dialing temporarily when dialing out. After
the call is ended, the dial mode will change back to
pulse.
4.21

Setting the Flash Time

600MS
The default flash time is
need to change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to
SETUP BS
select .
2. Press MENU and then VOL+ or REDIAL/VOL- to
FLASH TIME
select .
3. Press MENU and then VOL+ or REDIAL/VOL- to
the flash time you want. (8 options are available:
100 110 250 300 400 600
, , , , ,
4. Press MENU to save.
4.22

Setting the Area Code

1. Press MENU and then VOL+ or REDIAL/VOL- to
SETUP BS
select .
2. Press MENU and then VOL+ or REDIAL/VOL- to
AREA CODE
select .
3. Press MENU and enter the area code.
4. Press MENU to save.
. It is unlikely that you should
700MS
and )
Using the phone
90
,