Setting The Announcement Mode; Setting The Number Of Rings; Announcement - Motorola L512CBT User Manual

P
3. Press to confirm.
OR
4. Press ANS ON/OFF/
answering machine on and answering machine off.

3.25.3 Setting the announcement mode

P
1. Press and then
Answer Machine
VOL- to select
P
2. Press and then
Answerer Mode
VOL- to select
P
3. Press and then
VOL- to select the announcement modes:
Annc & Record
• invites your callers to leave a
message.
Announce Only
• lets callers hear your announcement
but they cannot leave a message.
P
4. Press to save.

3.25.4 Setting the number of rings

P
1. Press and then
Answer Machine
VOL- to select
P
2. Press and then
Rings To Answer
VOL- to select
Using the phone
to toggle between
/VOL+ or /REDIAL/
.
/VOL+ or /REDIAL/
.
/VOL+ or /REDIAL/
/VOL+ or /REDIAL/
.
/VOL+ or /REDIAL/
.
P
3. Press and then
VOL- to select the rings to answer. (4 options are
Toll Saver 3 Rings
available: ,
NOTE
If Toll Saver setting is selected, the answering machine
will pick up after two rings if there are new messages,
and after four rings if there are no messages.
P
4. Press to save.

3.25.5 Announcement

This is the message your callers hear on the answering
machine. There are two pre-recorded outgoing
messages, or you can record your own.
3.25.5.1 Recording the announcement
P
1. Press and then
Answer Machine
VOL- to select
P
2. Press and then
Announcement
VOL- to select
P
3. Press to select
P
4. Press and then
VOL- to select the answer mode
Announce Only
.
P
5. Press to start recording after a "beep"
sound is heard.
/VOL+ or /REDIAL/
4 Rings 5 RINGS
, , and ).
/VOL+ or /REDIAL/
.
/VOL+ or /REDIAL/
.
Record
.
/VOL+ or /REDIAL/
Annc & Record
or
31