Deleting All Old Messages; Remote Access - Motorola L512CBT User Manual

4.26.8 Deleting all old messages

1. Press MENU and then VOL+ or REDIAL/VOL- to
ANSWER MACHINE
select
2. Press MENU and then VOL+ or REDIAL/VOL-
DEL ALL OLD MSG
select
3. Press MENU to confirm.
NOTE
When the answering machine is full,
there are new messages.
toggle within 2 seconds with
user to delete some answering machine messages to
free up the memory.

4.26.9 Remote access

Remote access allows you to operate your answering
machine and listen to your messages by calling your
phone from another phone.
Turn the remote access on/off
1. Press MENU and then VOL+ or REDIAL/VOL- to
ANSWER MACHINE
select
2. Press MENU and then VOL+ or REDIAL/VOL- to
REMOTE ACCESS
select
3. Press MENU and then VOL+ or REDIAL/VOL- to
ON OFF
select or .
4. Press MENU to confirm.
Using the phone
.
.
will flash if
ERASE SOME ANSWERER MSG
MEMORY FULL
in idle to alert
.
.
To enter the remote access mode, dial your phone
number from another phone, when you hear the
announcement, press TONE/* and then enter the 4-digit
remote security code (default code is 0000) on your
another telephone.
The correct sequence of the 4 security PIN digits needs
to be detected before entering remote access mode.
Random digits detected prior to the correct 4 digits
sequence are ignored, and answering machine recording
continues until the complete PIN is detected. There is no
will
system prompt to enter the remote access code.
Press the following keys on your another phone to
perform the following functions, after entering your
remote access mode.
Press... To...
1 Press once to replay the current message
from the beginning. Press twice to play
the previous message.
2 Play/Stop the message
3 Skip forward to the next message
4 Toggle Answer Off/Announce Only/
Announce and Record modes
7 Listen to the Main Menu (for Full Voice
prompts only)
0 Delete the message
49