Setting The Announcement Mode; Setting The Number Of Rings; Announcement - Motorola L512CBT User Manual

4.26.3 Setting the announcement mode

1. Press MENU and then VOL+ or REDIAL/VOL- to
ANSWER MACHINE
select
2. Press MENU and then VOL+ or REDIAL/VOL- to
ANSWERER MODE
select
3. Press MENU and then VOL+ or REDIAL/VOL- to
select the announcement modes:
ANNC & RECORD
• invites your callers to leave a
message.
ANNOUNCE ONLY
• lets callers hear your
announcement but they cannot leave a message.
4. Press MENU to save.

4.26.4 Setting the number of rings

1. Press MENU and then VOL+ or REDIAL/VOL- to
ANSWER MACHINE
select
2. Press MENU and then VOL+ or REDIAL/VOL- to
RINGS TO ANSWER
select
3. Press MENU and then VOL+ or REDIAL/VOL- to
select the rings to answer. (4 options are available:
TOLL SAVER 3 4 5 RINGS
, , , or
Using the phone
.
.
.
.
).
NOTE
If Toll Saver setting is selected, the answering machine
will pick up after two rings if there are new messages,
and after four rings if there are no messages.
4. Press MENU to save.

4.26.5 Announcement

This is the message your callers hear on the answering
machine. There are two pre-recorded outgoing
messages, or you can record your own.
4.26.5.1 Recording the announcement
1. Press MENU and then VOL+ or REDIAL/VOL- to
ANSWER MACHINE
select
2. Press MENU and then VOL+ or REDIAL/VOL- to
ANNOUNCEMENT
select .
3. Press MENU to select
4. Press MENU and then VOL+ or REDIAL/VOL- to
select the answer mode
ONLY
.
5. Press MENU to start recording after a "beep" sound
is heard.
6. Press MENU again to stop recording and save the
message. The just saved message is played
automatically.
.
RECORD
.
ANNC & RECORD ANNOUNCE
or
47