MX-5111N
[13] MX-PNX5A/B/C/D (PUNCH MODULE)
1. Unpacking
A. Removal of the punch unit
B. Packed items check
1
000-0000
3
No.
Name
1
Harness A (Purple)
2
Harness B (Gray)
3
Punch jam processing label
* Use the punch position labels bundled with the MX-FN10.
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Installation of the punch unit
1)
Disconnect the connector between the main unit and the sad-
dle finisher.
2
Quantity
1
1
1
MX-5111N MX-PNX5A/B/C/D (PUNCH MODULE) 13 – 1
Service Manual
2)
Release the lock and separate the saddle finisher from the
main unit.
3)
Remove the screw, and remove the rear cover.
4)
Remove the screw, and remove the front lower cover.
1
2