Table of Contents
Advertisement
B. Removal of the fixing tape and protection
material
C. Packed items check
1
4
5
6
10
11
No.
Name
1
Paper exit tray
2
Connection plate
3
Saddle tray
4
Paper holding A
5
Paper holding B
6
Fixing screw A
7
Fixing screw B
8
Fixing screw C
9
Staple cartridge
10
Staple position label (For scanner)
11
Staple position label (For RSPF/DSPF)
12
Punch position label (For scanner)
13
Punch position label (For RSPF/DSPF)
* The punch position labels (No.12 and No.13) should be kept at
hand since they will be necessary when installing the punch unit.
2
3
7
8
9
12
13
Quantity
1
1
1
1
1
5
2
2
1
1
1
1
1
MX-5111N MX-FN10 (SADDLE STITCH FINISHER) 12 – 2
2.
Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
NOTE: Installing the MX-FN10 requires that the option desk and
paper pass unit be installed in advance. Be sure to com-
plete the installation of the option desk and paper pass unit
before installing the saddle finisher.
Make sure that the connection plate provided on the front
side of the option desk is securely installed.
Make sure that the connection plate included in the pack-
age is securely installed.
A. Replacement of the Operation Manual storage
cover
1)
Remove the Operation Manual storage cover on the left side of
the machine.
1
2
2)
Install the Operation Manual storage cover (which was
removed from the machine) to the saddle finisher.
B. Installation of the paper exit tray
1)
Engage the pawls (two positions) of the paper exit tray
(Packed items) on the finisher.
Fix the paper exit tray with fixing screws A (Packed items).
2
Hide quick links:
Advertisement
Table of Contents
