Mx-Rb11 (Paper Pass Unit) - Sharp MX-4110N Installation Manual

[11] MX-RB11 (PAPER PASS UNIT)

MX-5111N
1. Unpacking
A. Removal of the paper pass unit
B. Removal of the fixing tape
Service Manual
C. Packed items check
2.
NOTE: Before installation, be sure to turn both the operation and
A. Removal of the paper holding arm unit
1)
MX-5111N MX-RB11 (PAPER PASS UNIT) 11 – 1
1 2
5
4 6
No. Packed part names
1 Right cover plate
2 Interface left cabinet
3 Reverse tray
4 Fixing screw A
5 Resin clip
6 Reverse detection actuator
7 Front cabinet upper C
Installation
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
Push up the section A to disengage the pawl, and remove the
paper holding arm and the paper holding arm holder together
as a unit.
* Be careful to remove both of the paper holding arm (which is
easily removed alone) and the paper holding arm holder.
2
3
7
Quantity
1
1
1
6
1
1
1
A