Toyota 2014 highlander Manual page 93

100
2. Instrument cluster
Customizable items
■
● Eco Driving Indicator Light
Select to activate/deactivate the Eco Driving Indicator Light.
● Language
Select to change the language on the display.
● Units
Select to change the unit of measure for fuel consumption.
Settings can be changed. (Customizable features: →P. 663)
Setting display automatic cancelation
■
In the following situations, setting display in which the settings can be
changed through the "DISP" switch will automatically be turned off.
When a warning message appears while the setting display is displayed
●
When the vehicle begins to move while the setting display is displayed
●
Liquid crystal display
■
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
WARNING
The information display at low temperatures
■
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the display monitor may
respond slowly, and display changes may be delayed.
For example, there is a lag between the driver's shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in death or injury.
Cautions during setting up the display
■
As the engine needs to be running during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO)
may collect and enter the vehicle. This may lead to death or a serious
health hazard.
NOTICE
During setting up the display
■
To prevent battery discharge, ensure that the engine is running while setting
up the display features.
HIGHLANDER_U (OM48A12U)