Calling By Voice Recognition; Dial By Number; Dial By Name - Toyota 2014 highlander Manual

CALLING BY VOICE RECOGNITION

DIAL BY NUMBER

1
step
Press on the steering wheel. After
the beep say, "Dial <number>." Say
the phone number digits individually,
without pausing (e.g. "Dial Three, one,
zero, four...").
Quick Tip - If you know your next command, you
can press at any time to interrupt the prompt.
Speak your command after the beep.
3 Call will begin dialing.
step
Some Bluetooth ® equipped cell phones
may or may not show battery or signal strength on the
display.
Quick Tip - It is recommended that you reduce
background noise prior to using the Voice
Recognition system. Conversation, high fan speed,
wind noise (open windows), etc., may prevent the
voice recognition system from understanding your
commands.
9
2
step
The system will ask you to verify the
number.
4
step
Call is active when
indicated. To end call, press
on the screen or on the steering
wheel.
If you are able to successfully transfer your phone book, you can dial by name using voice recognition.
Please say the name exactly as it is entered in your phone when in the telephone screen. If you have
difficulty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone
manufacturer's user guide.
1
step
Press
the beep say, "Call <name>*." Please
say the name exactly as it is entered in
your phone.
*NOTE: When saying contact name, be sure to say it
exactly as it is entered in your address book
Quick Tip - If you know your next command, you
can press at any time to interrupt the prompt.
Speak your command after the beep.
is
3
step
Call is active when
indicated. To end call, press
on the screen or
wheel.
CALLING BY VOICE RECOGNITION
2
step
on the steering wheel. After
is
on the steering

DIAL BY NAME

Verify the contact name, and then
dialing will begin.
10