Toyota 2014 highlander Manual page 552

Warning message
(If equipped)
Color display only
(If equipped)
Color display only
(Flashes)
(If equipped)
*
: Refer to the separate "Scheduled Maintenance Guide" or "Owner's Manual
Supplement" for the maintenance interval applicable to your vehicle.
HIGHLANDER_U (OM48A12U)
8-2. Steps to take in an emergency
Details/Actions
Indicates that the Automatic High Beam switch is
pressed while the headlights are in low beam.
→ Turn the high beam on and press the Auto-
matic High Beam switch again.
Indicates that, since the VSC (Vehicle Stability
Control) system was turned off, the pre-collision
brake system operation is stopped
→ Turn the VSC on. (→P. 301)
Indicates that the PCS (Pre-collision system) is
not currently functional because the grille cover
or the sensor is dirty
→ Check the grille cover and the sensor and
clean them if they are dirty.
583
8