Toyota 2014 highlander Manual page 61

Installation with LATCH system
Fold the seatback while pulling
1
the lever. Return the seatback
and secure it at the 1st lock
position (most upright position).
Move the seat as far back as
possible.
If your child restraint system inter-
feres with a head restraint and can-
not be installed properly, install the
child restraint system after remov-
ing the head restraint. (→P. 169)
Widen the gap between the seat cushion and seatback slightly.
2
Type A
Latch the hooks of the lower
3
straps
anchors.
If the child restraint has a top
tether strap, the top tether strap
should be latched onto the top
tether strap anchor.
For owners in Canada:
The symbol on a child restraint
system indicates the presence
of a lower connector system.
HIGHLANDER_U (OM48A12U)
onto the LATCH
1-1. For safe use
Canada only
67
1