Toyota 2014 highlander Manual page 643

658
9-1. Specifications
Tire related term
Bias ply tire
Carcass
Chunking
Cord
Cord separation
Cracking
CT
Extra load tire
Groove
Innerliner
Innerliner separation
Intended
sidewall
HIGHLANDER_U (OM48A12U)
A pneumatic tire in which the ply cords that
extend to the beads are laid at alternate
angles substantially less than 90 degrees to
the centerline of the tread
The tire structure, except tread and sidewall
rubber which, when inflated, bears the load
The breaking away of pieces of the tread or
sidewall
The strands forming the plies in the tire
The parting of cords from adjacent rubber
compounds
Any parting within the tread, sidewall, or inner-
liner of the tire extending to cord material
A pneumatic tire with an inverted flange tire
and rim system in which the rim is designed
with rim flanges pointed radially inward and
the tire is designed to fit on the underside of
the rim in a manner that encloses the rim
flanges inside the air cavity of the tire
A tire designed to operate at higher loads and
at higher inflation pressures than the corre-
sponding standard tire
The space between two adjacent tread ribs
The layer(s) forming the inside surface of a
tubeless tire that contains the inflating medium
within the tire
The parting of the innerliner from cord material
in the carcass
(a) The sidewall that contains a whitewall,
bears white lettering, or bears manufac-
turer, brand, and/or model name molding
that is higher or deeper than the same
outboard
molding on the other sidewall of the tire, or
(b) The outward facing sidewall of an asym-
metrical tire that has a particular side that
must always face outward when mounted
on a vehicle
Meaning