Drip Tray - Miele CVA 4075 Operating And Installation Instructions

Drip tray

The trip tray contains a sensor which
causes the display to show when the
tray is full and needs to be emptied.
Clean the drip tray daily.
Remove the drip tray after the final
rinse when no more water runs from
the lines.
^ Open the door and pull the drip tray
out.
The drip tray contains a grid to avoid
spilling during transport.
Cleaning and Care
^ Wash the drip tray in the dishwasher
or by hand with hot water and liquid
dish soap, then dry with a soft cloth.
Take care that the metal contacts at
the back of the drip tray are clean
and dry. If the contacts are soiled or
wet the unit cannot detect when the
drip tray is full and needs to be
emptied.
^ Push the drip tray with grid along the
right edge all way in the machine.
^ Close the door.
37