Miele CVA 4075 Operating And Installation Instructions page 44

Cleaning and Care
Exterior
The front of the appliance can be
cleaned with a sponge and a solution of
warm water and non abrasive liquid
dish soap. Dry with a soft cloth.
Only use a slightly damp sponge
when cleaning the controls. Water
could penetrate into the electronics
and cause damage.
Abrasive cleaning agents, glass
cleaning agents, all-purpose
cleaners, thinner or ammonium
cleaners should not be used on the
machine. They will damage the
surface.
Wipe any spills from descaling
immediately!
44
Stainless steel surfaces
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner (available from Miele).
To help prevent soiling, a conditioner
for stainless steel can also be used.
Apply sparingly and with even
pressure.
Stainless steel colored controls
Clean the buttons and knobs with a
sponge and a solution of warm
water and liquid dish soap. These
controls may become discolored or
damaged if not cleaned regularly.
Do not use a stainless steel cleaner
on the knobs or buttons. Clean
immediately after use.