Descaling When Not Prompted By A Message - Miele CVA 3650 Operating And Installation Instructions

Descaling the machine
^ When a message asking you to fill
the water container with fresh tap
water appears in the display, you
should remove the container and
rinse it out thoroughly with clean
water. Make sure all traces of
descaling agent are removed, and
then fill it up the the k mark with
clean tap water.
Empty the waste container at the
same time.
Water will flow out of both spouts during
the rinsing process. The drip tray will
need to be emptied several times
during this process.
When Programme finished appears in
the display,
^ touch the OK sensor.
The descaling programme is finished
and the machine can be used for
making drinks again.
54
Descaling when not prompted
by a message
If you want to carry out descaling
before being prompted to do so by the
machine,
Descale
K1 K2 K3 K4 K5 L
^ Select "Descale" with one of the arrow
sensors.
^ Touch the OK sensor to start the
descaling programme.
o n G C
k