Programming The Amount (Setting The Portion Sizes); Programming The Portion Size Via The Ok Sensor - Miele CVA 3650 Operating And Installation Instructions

Programming the amount (Setting the portion sizes)

The flavour of the coffee produced
depends on the type of coffee, how
finely the beans are ground and the
quantity of water used. Not all espresso
and coffee cups are the same size. To
ensure the machine uses the right
amount of water to suit your taste and
your cups, you can programme the
amount to use.
The programming amount procedure
should be carried out for espresso,
coffee and hot water.
The Espresso symbol dispenses a
standard size espresso to be served in
a standard espresso cup.
The Coffee symbol dispenses coffee
for a standard size coffee cup.
You can programme the amount in two
ways, either by touching the OK sensor
continually, or via the "Settings" option.
Espresso and coffee for all
chambers and types of coffee will
be dispensed using the amounts
programmed regardless of which
chamber or which type of coffee you
select for programming the amount.
Programming the portion size via the
OK sensor
^ Place the appropriate cup for the
amount you want to programme
under the appropriate spout.
^ Select the type of drink you require
(espresso, coffee or hot water).
^ Touch the OK sensor until "Prog. the
amount" appears in the display.
^ As soon as the cup is filled to the
level you want, touch the OK sensor
again to save the amount to memory.
The volume of water programmed will
now be dispensed every time this drink
is selected, regardlesss of the type of
coffee capsule selected.
Water flow stops automatically when
the maximum amount possible is
reached. The maximum amount
possible for that type of drink will be
saved.
If there is insufficient water in the
water container, the process will be
stopped and the amount will not be
saved.
37