Descaling When Not Prompted By A Message - Miele CVA 6401 Operating And Installation Instructions

^ Fill the water container up to the mark
with lukewarm water.
^ Drop two descaling tablets in the
water.
Follow the instructions for the mixing
ratio carefully. It is important that you
fill the water container with enough
water. Otherwise the descaling
programme will be cancelled
prematurely.
^ Replace the water container in the
coffee machine and close the front.
^ Follow the instructions in the display.
When "Rinse the water container and fill
with fresh water up to the
appears,
^ Remove the water container and
rinse it carefully with clean water.
Make sure that no descaling agent is
left in the water container. Fill the
water container with fresh, clean tap
water up to the
Also empty the waste container.
"Prog. finished" will appear in the
display to indicate that descaling has
been completed.
symbol"
symbol.
^ Touch the OK sensor.
The coffee machine has now been
descaled and can be used for making
drinks again.
When descaling the machine, wipe
up any spillages or splashes of
descaling agent immediately. These
would damage the surface.
After descaling the machine, carefully
rinse the water container and the drip
tray to remove all traces of descaling
agent.
Descaling when not prompted
by a message
^ Touch
.
^ Touch the Y arrow until
"Maintenance" is highlighted.
Touch the OK sensor.
^ Touch the arrow sensors until
"Descale the appliance" is
highlighted in the display.
The descaling process cannot be
cancelled once it has started. The
process has to be carried through to
the end.
^ Touch the OK sensor.
The descaling process will begin.
Descaling
61