Filling The Capsule Carousel; Taking Capsules Out Of The Capsule Carousel - Miele CVA 3650 Operating And Installation Instructions

Filling the machine with water and coffee capsules

Filling the capsule carousel

Do not put anything other than
Nespresso coffee capsules in the
capsule carousel.
Do not use coffee capsules which
are damaged, broken, dented or
bent up at the edges. They can get
stuck in the machine.
The capsule carousel has
five chambers, each holding
four capsules. It is important
to allocate the chambers correctly (see
"Allocating and saving a coffee type").
You can fill all the chambers with the
same type of coffee, if wished.
Some of the chambers are allocated a
type of coffee at the factory. Fill the
chambers with the appropriate type of
coffee, or re-allocate the chamber for a
different type of coffee (see "Allocating
and saving a coffee type"). The
machine will then dispense the type of
coffee you select.
^ Pull the carousel runners a out as far
as possible.
^ Fill the chambers c in the capsule
carousel b with capsules. Make sure
you put them in correctly with the foil
16
facing downwards. You can take the
capsule carousel out by lifting it
upwards to fill it.
Please note that the individual
capsules sit loosely in the capsule
carousel to prevent them from
becoming jammed.
^ If you have removed the capsule
carousel, place it onto the carousel
runners before putting it back into the
machine. You do not have to position
it in a particular way, as the machine
will automatically guide it into
position.
^ Push the carousel runners fully back
into the machine.
^ Close the front of the machine.
The machine will now align the capsule
carousel. You will be able to hear this
happening.
Taking capsules out of the
capsule carousel
If you want to change the capsules in
the carousel:
^ Pull the carousel runners out.
^ Pull the capsule carousel upwards to
remove it.
^ Push upwards on the ring underneath
the magazine and then remove the
capsules.