Programming The Amount Via "Settings; Setting Portion Sizes For Different User Profiles - Miele CVA 3650 Operating And Installation Instructions

Programming the amount (Setting the portion sizes)
Programming the amount via
"Settings"
^ Place the appropriate cup for the
amount you want to programme
under the appropriate spout.
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
^ Touch the right arrow sensor until
"Prog. the amount" is highlighted and
touch the OK sensor.
The drink types; espresso, coffee and
hot water will appear in the display. You
can set the quantity of water dispensed
for these drinks.
^ Select the type of drink with the arrow
sensors and touch the OK sensor.
^ If you have selected coffee or
espresso, select the type of coffee
you want to drink just now and touch
the OK sensor. (If the OK sensor
does not react, the chamber for the
type of coffee is empty).
^ Select "Start".
^ When the cup is filled to the level you
want, touch the OK sensor.
The portion size for this particular drink
is now set and stored in memory. The
volume of water programmed will now
be dispensed every time this drink is
selected, regardless of the type of
coffee capsule selected.
38
Setting portion sizes for different
User profiles
In addition to the standard
user profile you can also set
specific portion sizes for the
nine other user profiles.
^ Use the arrow sensors to select "User
profile" and then touch the OK
sensor.
^ Select "Select" with the arrow sensors
and touch the OK sensor.
^ Use the arrow sensors to select the
name of the user profile for which you
want to set the portion size and touch
the OK sensor.
A number will appear in the
top line of the display after
the user profile symbol n to
show which user profile has been
selected.
Proceed now as described at the
beginning of the section.
All settings and water quantities will
now apply for that user.