Machine Front - Miele CVA 3650 Operating And Installation Instructions

Cleaning and care

Machine front

If soiling is not removed promptly it
could cause the surface of the
machine to alter or discolour.
Remove any soiling immediately.
^ Switch the machine off with the
On/Off sensor.
^ Clean the front using a damp Miele
microfibre E-cloth or with a clean
sponge and a solution of hot water
and washing-up liquid. After
cleaning, dry with a soft cloth.
Make sure that water cannot get
behind the display.
All external surfaces are susceptible
to scratching. Scratches on glass
surfaces could even cause a
breakage.
Contact with unsuitable cleaning
agents can discolour the external
surfaces.
Wipe up any spillages or splashes
of descaling agent immediately.
50
Avoid the following on all types of
front:
– cleaning agents containing soda,
amonia, acids or chlorides,
– solvent-based cleaning agents,
– cleaning agents containing
descaling agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– hard, abrasive sponges, e.g. pot
scourers, brushes or sponges which
have been previously used with
abrasive cleaning agents,
– melamine eraser blocks,
– sharp metal scrapers.