Beep On/Off - Vertex Standard VXA-220 Operating Manual

Beep On/Off

The VXA-220's key/button beeper provides convenient
audible feedback whenever a button is pressed. Each key
and button has a different beep pitch, and each function
has a unique beep combination.
When you are scanning, the beeper will be heard each
time the scanner halts on a busy channel. This may be
distracting in some environments; if you want to turn the
beeper off (or back on again):
To disable the beeper,
press the [ F ] key fol-
l o w e d b y
[ 8 ( BEEP )] key. The
"BEEP OFF" nota-
tion will appear on the
display for 3 seconds.
To turn the beep on, repeat the above step (press the
[ F ] key followed by the [ 8 ( BEEP )] key); the "BEEP
ON-" notation will appear on the display for 3 sec-
onds.
You may turn the beeper on and off via the Menu Item
"BEEP."
20
A
DVANCED
t h e
F
O
PERATION
The VXA-220 provides for adjustment of the Beep level
via the Menu. To adjust the Beep level:
Press the [ F ] key mo-
mentarily, then press the
[ ( SET )] key to acti-
vate the Menu ("SET")
mode.
Rotate the DIAL selec-
tor knob to select Menu
Item "BPLV."
Press the [ ENT (
to enable adjustment of
this Menu item.
Rotate the DIAL selector knob to select the desired
beep level (1, 2, or 3).
When you have made your selection, press the
[ ENT ( )] key to save the new setting, and then press
the PTT key to exit to normal operation.
VXA-220 P
RO
F
)] key
VI O M
PERATING ANUAL