Names And Functions - Luxman C-700u Owner's Manual

Names and Functions

Front panel
1 2
1. Operation switch (OPERATION)
Turns this unit from the standby state to operation state.
When the main power switch on the rear panel is turned on
to set this unit to the standby state and this switch is turned
on, this unit is set to the operation state.
Pressing this switch again at the operating state turns the
unit to the standby state.
2. Operation indicator (OPERATION)
Blinks during warm-up when the operation switch is turned
on and lights up when the operation state is activated af-
terward.
4
3
13 12 11 10
3. Input selector (INPUT SELECTOR)
4. Display window
5. Volume control (VOLUME CONTROL)
4 5
9 8 7 6
Selects the unbalanced input terminal or balanced input ter-
minal, both of which are located on the rear panel.
• Input transition by rotating clockwise:
→ → →
LINE-1 LINE-2 LINE-3 LINE-4
→ →
BAL LINE-2 LINE-1...
• Input transition by rotating counterclockwise:
→ →
LINE-1 BAL LINE-2 BAL LINE-1
→ →
LINE-3 LINE-2 LINE-1 ...
Factory default: LINE-1
During input selecting operation, input/output muting circuit
is in operation and the unit will be on mute.
Displays the operation status of this unit.
This display window is composed of 8 indicators, input dis-
play, and volume display.
Adjusts the sound volume.
When this control is rotated counterclockwise to the end,
the unit is on mute. The sound volume gradually becomes
higher when the control is rotated clockwise as follows:
→ → → →
mute -87 dB -86 dB .. 0 dB in steps of 1 dB.
→ →
LINE-5 BAL LINE-1
→ → →
LINE-5 LINE-4