Luxman C-700u Owner's Manual page 19

Memory
This unit memorizes the following items when the operation
switch is set to OFF or the main power switch is set to OFF:
Item Default
INPUT Selected source
OUTPUT MODE Selected mode
BAL PHASE INPUT-1, 2 : 3±, 2±
OUTPUT : 3±, 2±
BAL INVERT NORMAL / INVERT
DIMMER Normal light/dim/very dim/
light off
ZOOM ON / OFF
LOUDNESS ON / OFF
LINE-STRAIGHT ON / OFF
EXT PRE ON / OFF
MONITOR ON / OFF
REC OUT ON / OFF
Memory reset
The following operations restore all the settings to the factory
defaults.
(1) Turn this unit to the standby state.
(2) Hold down the operation switch on the main unit for 5
seconds or more and press the dimmer switch once while
holding down the operation switch.
That's all for memory reset.
Factory default
Item Default
INPUT LINE-1
OUTPUT MODE UNBALANCE
BAL PHASE INPUT-1, 2 : 3+, 2−
OUTPUT : 3+, 2−
BAL INVERT NORMAL
DIMMER MAX (under normal conditions)
ZOOM OFF
LOUDNESS OFF
LINE-STRAIGHT OFF
EXT PRE OFF
MONITOR OFF
REC OUT ON
CONTROL AMPLIFIER C-700u
Inhibition and caution
When a setting cannot be changed, an error message as fol-
lows is displayed:
Display Caution
UNBALANCE When the input and output are
MODE!! both unbalance, the balanced
phase cannot be inverted.
STRAIGHT When the line straight is set to
ON!! ON, loudness cannot be selected.
EXT PRE When the external pre is set to
MODE!! ON, mute cannot be selected.
EXT PRE When the external pre is set to
MODE!! ON, the output mode cannot be
changed.
17