Rear Panel - Luxman C-700u Owner's Manual

Names and Functions

Rear panel

1. Unbalanced input terminals/INPUTS
(LINE-1, LINE-2, LINE-3, LINE-4, LINE-5)
RCA terminals to input unbalanced audio signals of a line
level
Connect these terminals to an unbalanced output of an in-
put device such as a CD player with a pin-plug cable.
Audio signal inputs are selected by the input selector and
delivered.
LINE-1, LINE-2, LINE-3, LINE-4 and LINE-5 are equivalent
in quality.
2. Record output terminal (REC OUT)
RCA terminal to output audio signals of an input device se-
lected by the input selection switch.
Connect this terminal to a line input of a recorder with a
pin-plug cable.
Output audio signals are not affected by the tone control
function, volume control function, or LR balance function.
This output terminal can be toggled on and off with use of
the preset function of the remote control.
Factory default: Rec out on
10
1 2 3
11 10
3. Monitor input terminal (MONITOR)
4. Unbalanced output terminals/OUTPUTS
4 5 6
9 8
RCA terminal to input audio signals of a recorder.
Connect this terminal to a line output of a recorder with a
pin-plug cable.
Audio signal input is selected by the monitor switch and
delivered.
Factory default: Monitor off
(LINE-1, LINE-2)
RCA terminals to output unbalanced audio signals of this
unit.
Connect these terminals to an unbalanced input of an out-
put device such as a power amplifier with a pin-plug cable.
Audio output signals are selected by the output mode se-
lection switch.
LINE-1 and LINE-2 are equivalent in quality.
Factory default output mode: Unbalanced (UNBAL)
7