Problem Solving Guide - Miele KWT 6321 UG Operating And Installation Instructions

Problem solving guide

With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
If, after consulting this guide, you cannot remedy the problem, please contact
Miele. Please note, however, that a call-out fee will be applied to unnecessary ser-
vice visits where the problem could have been rectified as described in these
operating instructions.
To prevent cold from escaping, avoid opening the appliance door until the fault
has been corrected.
Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
The appliance is not cooling.
Problem
The interior
lighting does not
come on when the
door is opened and
the temperature is
not visible in the
display.
The control panel
and interior
lighting are
working.
32
Possible cause
The appliance has not been
switched on.
The plug is not correctly
inserted into the socket.
Check whether the mains
fuse has tripped. If it has,
there could be a fault with
the appliance, the
household electrical wiring
or another electrical
appliance.
Demo mode has been
activated.
Remedy
^ Switch the appliance on.
The temperature displays
must be lit up.
^ Insert the plug into the
socket correctly.
^ Contact a qualified
electrician or Miele.
^ Call Miele.