Tail Wheel Assembly Installation - RC Guys Super Decathlon ARF Assembly Manual

Tail Wheel Assembly Installation
Collect these parts.
ÿ 1 ­ factory assembled tail wheel bracket
ÿ 2 ­ wood screws
ÿ 2 ­ tail wheel control springs
ÿ 1 ­ tail wheel rudder bracket
ÿ 2 ­ small wood screws
Position the tail wheel assembly over the fuse and mark through the
holes.
Secure the tail wheel assembly to the fuse using the supplied hardware,
(2 x wood screws).
Collect the pre­assembled tail wheel bracket and hardware.
Secure the tail wheel steering bracket to the rudder using the supplied
hardware, (2 x wood screws).
Make 2 small loops in the ends of the tail wheel steering springs and
secure them to the bracket and steering arms.
­1­