Table of Contents
Advertisement
Aileron Servo Installation
Collect these parts.
ÿ 2 aileron servos and mounting hardware
ÿ 2 18 inch servo extensions
ÿ 2 aileron servo hatches
ÿ 8 small wood screws
ÿ 2 control horn trumpet bases
ÿ 2 trumpet screws
ÿ 2 trumpet clevises (black plastic)
Install the servos onto the factory preinstalled mounting
blocks using the hardware supplied with your radio.
Using a sharp Xacto knife, remove the covering around the servo
wing cutouts.
Connect an 18 inch servo extension to the servos and secure the
connection with tape.
Using a light string, tie a nut or small weigh to one end and drop it
through the wing ribs openings until it appears in the aileron servo
opening. Tape or tie the string to the servo lead and carefully pull it
through the wing.
15
Advertisement
Table of Contents
