Wheel Pant Installation
Collect these parts.
ÿ 2 wheel pants
ÿ 4 – 632 T nuts
ÿ 4 632 x ½ socket head bolts
ÿ 4 flat washers
ÿ 4 locking washers
Using a Dremel, ensure the holes in the wheel pants fit the axel nuts.
Note: You may need to enlarge the hole in the bottom of the wheel pant for the wheels to turn freely.
Install a wheel collar on the axel, then the wheel pant with the wheel
inside, then add the second wheel collar. This is a bit tricky as they
all must be properly positioned together on the axel. Do not tighten
the collars as yet.
9