Radio Set Up
You will need to locate your receiver and batteries on the upper plywood deck.
We used foam wrap and plastic electrical straps to secure our receiver and battery.
You will need a Y servo extension to connect the 2 aileron servo extensions if you are connecting to the same
receiver channel.
Tip: You will need to balance your model before choosing the location of your batteries.
Note: The C of G is on the main wing spar. 41/8" from the leading edge of the wing nearest the fuse.
Control Surface Throws
rudder +/
11/2" low and 21/2" high
elevators +/
3/4" low and 11/4" high
ailerons +/
3/4" low and 11/4" high
Assemble the entire model and make any changes to suit.
25