Acoustic Signals ) - Miele FN 35402 i Operating And Installation Instructions

Selecting further settings

Acoustic signals )

The appliance has acoustic signals
such as the sensor tone and the door
and temperature alarms.
You can switch the sensor tone or the
door alarm tone on or off but you
cannot deactivate the temperature
alarm.
There are four settings to choose from.
Option 3 is set the factory, i.e. the
sensor tone and the door alarm are
switched on.
Switching acoustic signals on/off
^ Touch the settings sensor.
All symbols available for selection will
appear in the display and the 0 symbol
flashes.
^ Touch the sensors for setting the
temperature (X or Y) repeatedly until
the ) symbol flashes.
^ Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the ) symbol lights up in the display.
28
^ By touching the X or Y sensor you
can now select:
0: sensor tone off; door alarm off
1: sensor tone off; door alarm on
2: sensor tone off; door alarm on
3: sensor tone on; door alarm on
^ Touch the OK sensor to confirm your
selection.
The selected setting is applied, the )
symbol flashes.
^ Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits
settings mode automatically after
approximately one minute.
(after 4 minutes)
(after 2 minutes)
(after 2 minutes)