Miele FN 35402 i Operating And Installation Instructions page 65

^ Undo screws d completely.
^ Fit bracket g to the opposite side
and loosely fit screws d.
^ Unscrew screws e completely, and
loosely screw them into the holes on
the opposite side.
If you have put locking pins into the
hinges to stop the door opening too far:
^ Remove the locking pins from the top
of the hinges.
Changing the door hinging
To remove the soft-close mechanism
Warning. The soft-close mechanism
snaps shut when dismantled.
Danger of injury.
^ Place the door with the outer side
downwards on a stable surface.
^ Pull soft-close mechanism h out of
the ball joint.
^ Unscrew holder i and remove
soft-close mechanism h.
^ Undo ball joint j using a screwdriver
and reposition and secure it, as
shown.
65