Miele FN 35402 i Operating And Installation Instructions page 80

Installing the appliance
^ Whilst counterholding adjusting bolts
h with a screwdriver, tighten nuts c
on the appliance door with ring
spanner j.
^ Cover strip k must be completely
hidden in the niche, and must not
protrude.
80
^ Drill holes l in the furniture door and
fit screws m. Make sure the two
metal edges are aligned (Symbol II).
^ Close the appliance door and the
furniture door.
Aligning the door
– Depth adjustment (Z)
^ Loosen screws i at the top of the
appliance door, and screw n on the
fixing bracket at the bottom. By
moving the furniture door, create a
gap of 2 mm between the furniture
door and the housing unit.