Switching On And Off; Before Using For The First Time; Operating The Appliance; Switching On - Miele FN 35402 i Operating And Installation Instructions

Before using for the first time

Packaging material
^ Remove all packaging material from
the inside of the appliance.
Cleaning
Please refer to the relevant
instructions in "Cleaning".
^ Clean the inside of the appliance and
the accessories.

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
A tone will sound each time a sensor is
touched. You can deactivate this, if you
wish (see "Selecting further settings -
Acoustic signals").

Switching on and off

Switching on

When the appliance is connected to the
electrical supply, the mains connection
symbol t will appear in the display
after a short while.
^ Touch the On/Off sensor.
The mains connection symbol t goes
out and the temperature appears in the
display.
Two bars will flash in the display while
the current temperature is above 0 °C.
The appliance begins to cool.
The temperature display and the alarm
symbol ; will flash at the same time
until the required temperature is
reached.
When the door is opened, the interior
lighting comes on and the LED lighting
becomes brighter until it reaches its
maximum brightness.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
19