Connecting Peripheral Equipment - Tatung TME24 User Manual

● For your safety, please select appropriate wall mount bracket or base.
● To avoid hurt, it is required to place the set on stable plane, or fix on firm wall.
● Ask qualified personnel to mount the
● Do not place the
Monitor set at any place susceptible to mechanical vibration.
● Do not place the
Monitor set at any place that insects may enter.
● Do not mount the
Monitor set against air conditioner, or else the internal panel of the display may condense moisture and cause failure.
● Do not place the
Monitor set at any place with strong magnetic field, or else it may be interfered with and damaged by electromagnetic
wave.

Connecting peripheral equipment

You can connect various devices to the Monitor set and view high quality images. If the video device has HDMI, YPbPr/YCbCr, AV, PC and
other video output/input ports. You can select one of them and connect to corresponding input or output ports of the Monitor set. After
connected, press "SOURCE" key, then menu of signal source will be displayed on the
screen. Press the "▲/▼" key on the remote control to select the input signal,
and press "OK" key to confirm. The connecting mode is shown in the figure.
Connecting power supply
Power cable
To power socket
(100V-240VAC, 60/50Hz)
Monitor
Monitor set on the wall. Improper mounting may result in instable
6
Monitor set.
USB1 interface
USB2 interface
HDMI signal cable
Connect to the AV device
with HDMI interface
Earphone Socket
HDMI input connection