Menu Setting List - Tatung TME24 User Manual

Menu setting list

Refer to the table below for the specific menu settings.
Picture Mode
Contrast
Brightness
Saturation
Hue
PICTURE
Sharpness
Aspect Ratio
Color Temp.
Noise Reduction
Remark: The values of Contrast, Brightness, Hue, Saturation and Sharpness adjusted by the user will be saved
automatically.
Sound Mode
Treble
Bass
SOUND
Balance
Remark: The values of Treble and Bass adjusted by the user will be saved automatically.
Adjust the overall effect of images: Standard, Soft, User, Bright.
Adjust the overall layering of images: increase the analog value to improve the contrast and
decrease the analog value to reduce the contrast (0-100).
Adjust the overall brightness of images: increase the analog value to improve the brightness
and decrease the analog value to reduce the brightness (0-100).
Adjust the color depth of images: increase the analog value to improve the depth and decrease
the analog value to reduce the depth (0-100).
Adjust the hue of images: increase the analog value to increases green and decrease the
analog value to increases purple(0-100);
Adjust the sharpness of images: increase the analog value to increases the definition and
decrease the analog value to reduce the definition (0-100).
Adjust the aspect ratio: Full, 4:3, Subtitle, Film.
Adjust the overall color temperature of images: Standard, Warm, Cool.
Set the grade of noise reduction: Middle, High, Off, Low.
Select the audio mode: Standard, Music, Movie, User.
Adjust the treble: increase the analog value to increase the treble and decrease the analog
value to reduce the treble (0-100).
Adjust the bass: increase the analog value to increase the bass and decrease the analog value
to reduce the bass (0-100).
Adjust balance degree of right&left sound track: move the analog value to left to increase the
left volume; move the analog value to right to increase the right volume(L50-R50).
Generally, the balance is set to 0.
12