DSL-300G ADSL Modem User's Guide
Hub or Switch to Modem Connection
Connect the Modem to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as
shown in the diagram below:
If you wish to reserve the uplink port
on the switch or hub for another
device, connect to any on the other
MDI-X ports (1x, 2x, etc.) with a
cross-wired cable or use crossover
adapter.
Figure 2. Switch to Modem Connection
Power On Modem
To power on the device:
1. Insert the AC Power Adapter cord into the power receptacle located on the back of the Modem and plug the
adapter into a nearby power source.
2. You should see the Power LED indicator light up and remain lit.
4