Save & Reboot - D-Link DSL-300G User Manual

Save & Reboot
Whenever you use the Web Configuration Manager to change system settings, the changes are initially placed in
temporary storage (called random access memory or RAM). Your changes are made effective when you submit
them, but will be lost if the device is reset or turned off.
The Save & Reboot function saves your changes from RAM to permanent storage (called flash memory).
Note
Use the Save & Reboot menu to commit changes to permanent memory.
After you have submitted all the configuration changes you want to make for this session, click on the Save &
Reboot link in the Admin folder to view the Save & Reboot page.
To save current configuration settings as they have been submitted click the Save button. (Disregard the
selection in the Reboot Mode drop-down list; it does not affect the save process.)
The changes are now saved to permanent storage (flash memory).
Reboot the Modem
To reboot the device using the Configuration Manger, display the Save & Reboot page, select the appropriate
reboot mode from the drop-down menu, and then click the Reboot button.
Do not reboot the device using the Reset button on the back panel of the Modem to
activate new changes. This button resets the device settings to the manufacturer's
default values. Any custom settings will be lost.
IMPORTANT
DSL-300G ADSL Modem User's Guide
When you Submit changes, they are activated immediately, but they are only
saved until the device is reset or turned off. You must Save the changes
permanently.
Save and Reboot
34