D-Link DSL-300G User Manual page 21

The first web page you will see when you successfully login is the Quick Configuration page. Use the Quick
Configuration menu to setup the ADSL connection for a bridged type connection.
Web-based Manager Quick Configuration menu– First Time Log On
In the Quick Configuration window configure the settings listed below to the values given to you by your ISP.
Change only the specific parameters that you have been instructed to change.
PVC
Operation Mode
Connection Type
VPI
VCI
DSL-300G ADSL Modem User's Guide
Select the PVC for configuration and click the Submit button to refresh the
screen. Then you may proceed to change the other parameters. Up to 8 unique
PVCs can be defined.
Default = 0.
Use this pull-down menu to enable a PVC connection profile. Choose "Enabled"
to activate the selected PVC or "Disabled" to disable it.
Choose "Bridged IP LLC" or "Bridged IP VC-Mux" form the pull-down menu.
Default Connection Type = Bridged IP LLC.
Type in the VPI value for the selected PVC. Use the value assigned by your
service provider. If you are setting up multiple virtual connections, remember that
each VPI/VCI combination must be unique to the device. Ask your service
provider or ISP for more information.
Default = 8.
Type in the VCI value for the selected PVC.
Default = 35.
13