Parmco PP0V-6S-DT-1 Installation And Operating Instructions Manual page 9

ELECTRONIC PROGRAMMER
Enables you to set the following operations:
• Clock (set by keys 2 and 3)
• Timer (set by key 1)
• Cooking time (set by key 2)
• End of cooking time (set by key 3)
• Manual operation settings (set by key 2 and 3)
• Setting time backwards (set by key 4)
• Setting time forward (set by key 4)
Once set, the digital display normally shows the time of
day but can show the set cooking time, end of cooking
countdown simply by pressing the corresponding key.
Please Note: Following an automatic cooking
programme the digital timer will remain in the
auto mode. Should you wish to use the oven
manually make sure you set the manual operation
function (see 'Manual operation').
Time setting ( 0:01 to 24:00 = hh,mm)
When switching on the appliance the first time or after a
power cut, the display shows both "A" and "0.00" (or the
minutes past the power failure) signs flashing. To set the time
push keys 2 and 3 simultaneously then press key 4 or 5 untill
you reach the current time. When done, the"A" symbol turns
off and the manual operation symbol
Manual operation
If the 'A' symbol is visible this means that the timer is in
the automatic mode and the lower oven will not operate
manually. Press keys 2 and 3 at the same time to set the
timer into manual mode; the 'A' symbol disappears.
Timer setting ( 0:01 to 0:59 = hh,mm)
Press key 1 and select cooking time by pushing key 4
or 5. Symbol turns on. Once the time set is expired
the acoustic alarm rings and
Automatic Operation (Lower Oven only)
A Semi-automatic program turns the oven on
immediately and turns it off again once the required
cooking duration has elapsed or the desired end time
has been reached.
A Fully-automatic program will calculate the start of cooking
once the desired duration and end time have been set.
Buzzer
The buzzer starts ringing when a cooking session has
reached its completion or the timer countdown is over.
It can ring up to 7 minutes. Press any function key to
make it stop beforehand.
DESCRIPTION OF THE APPLIANCE
is lit.
turns off.
1 2
Setting a Semi-automatic Programme using the
desired cooking duration.
Press key 2 and set the required duration of cooking by
keys 4 or 5; both symbols "A" and
Lower Oven Controls to the desired function and cooking
temperature. Once the set cooking duration has elapsed,
turns off; "A" flashes and the buzzer rings.
Setting a Semi-automatic Programme using the
desired end time.
Press key 3 and set the desired end-of-cooking time
using keys 4 or 5; both symbols "A" and
Turn the Lower Oven Controls to the desired function and
cooking temperature. Once the set end time is reached,
turns off, "A" flashes and the buzzer rings.
Setting a Fully-automatic Programme
(DelayedStart)
Set the desired cooking duration first using key 2 then
4 or 5 ("A" and
of-cooking time using key 3 then 4 or 5 (
off). Turn the Lower Oven Controls to the desired
function and cooking temperature. Symbol
on again when at the start of cooking session. When
cooking time is over,
buzzer will advice cooking completion.
Programme start and control
The programme starts immediately after setting. To check
settings of the programme press the corresponding key.
Modify or Cancel programme setting
In case the current time displayed on the clock is within
the cooking period set, an error in the automatic function
occurs, and both the buzzer ring and the flashing "A" draw
your attention. Such error in the set up can be amended by
varying the cooking time length or its end. Any programme
set can be modified at any time by pressing first its
corresponding programme key and then key 4 or 5. To
cancel a programme, correct the time set bringing it to a
value of "0.00". When functioning time is cancelled the end
of functioning is cancelled too and vice versa. The oven
turns off automatically and the "A" symbol flashes.
8
3 4 5
are lit. Turn the
turn on) then set the desired end-
turns off, "A" flashes and the
turn on.
turns
turns