Parmco PP0V-6S-DT-1 Installation And Operating Instructions Manual page 16

CHANGING THE OvEN LAMP
If the oven lamp needs replacing
have the following characteristics: 15 W - 240 Vac - 50
Hz - E 14 - resistant to high temperatures
To substitute the bulbs follow these instructions:
Bottom oven unit (fig. 11)
• Extract the side grids as indicated in the previous
paragraph.
• Unscrew glass protection cap (V) from bulb holder
by lifting it with a screwdriver (C) against the inside
wall of the oven.
• Substitute the bulb and reposition all elements
back by following the operation in reverse order.
Top oven unit (fig. 12)
Turn protective glass cap (C) counterclockwise and
change the lamp. Put the cap back on taking care
to insert the notches in the locking tangs and turn
clockwise.
INSTRUCTIONS FOR THE USER
the new lamp must
(300°C).
�
�
11
15
�
�
�
�
12