Parmco PP0V-6S-DT-1 Installation And Operating Instructions Manual page 6


Do not operate the appliance if you have wet hands to prevent personal
injuries.

Do not keep this appliance in outdoor conditions such as sun, rain, etc.

This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning the use of this appliance by a person responsible for their safety.

Before cooking for the first time, ensure the oven is empty and its door
closed. Heat the oven at the maximum temperature for two hours. This will
allow the protective coating on the interior of the oven to be burnt off and
dissipate the associated smells. Ensure adequate ventilation is possible in
the kitchen whilst burning off and don't be alarmed by a little bit of smoke
during this process.

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
oven glass door since they can scratch the surface, which may result in
shattering of the glass.

Keep the appliance thoroughly cleaned. Food residues may cause fire risks.

DO NOT use a steam cleaner to clean this appliance.

NEVER line the oven with aluminium sheets as doing so may damage the
enamel and elements.

Switch off the oven before removing the fan guard for cleaning. Replace the
guard after cleaning in accordance with the instructions.
• The appliance is not intended to be operated by means of an external timer
or separate remote-control system
• Ensure that the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock
• Avoid using the oven as a larder or as a saucepan cupboard when you are
not using it for cooking: if the oven is turned on accidentally it could cause
damage and accidents.
• If you are using an electrical socket near the appliance, make sure that the
cables are not touching the cooker and are far enough away from all hot
parts.
• When you have finished using the appliance check that all the controls are in
the off or closed position, checking that the "0" of the knob corresponds to
the "•" symbol serigraphic on the front panel.
• Switch off the electrical supply before you start cleaning or servicing the
appliance.
5