Advanced Operation Audio And Your Vcr - Sharp VC-MH714HM Operation Manual

TINS-3992UMZZ English.book Page 18 Monday, June 4, 2001 9:21 AM
ADVANCED OPERATION
AUDIO AND YOUR VCR
HI-FI STEREO SOUND
Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
AUDIO OUT
button on the remote control. If you wish to change the sound output you
can use the AUDIO OUT
• Press the AUDIO OUT
speakers. L will appear on the VCR display.
• Press the AUDIO OUT
speakers. R will appear on the VCR display.
• Press the AUDIO OUT
speakers. L and R
• Pressing the AUDIO OUT
heard. L and R will appear on the VCR display.
NICAM Hi-Fi STEREO SOUND
Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound
is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to
receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the
procedure below:
1.
MENU
Press the
main menu on the screen.
2.
Press the [ /
select MODE then press the
confirm.
• The MODE menu will be displayed with NICAM
selected.
3.
[ / ]to select OFF.
Press
SET
4.
SET
Press the
5.
Press the MENU
NOTES:
• If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R
will not appear on the display.
• lf the sound contains 'crackling' or 'popping' noises the sound quality may be
improved by adjusting the tracking using the
• If the poor quality is for a long period the VCR will automatically select the mono track
and the sound will be in mono.
• NICAM sound may not be stereo.
button as follows:
button once. The LEFT audio channel will be sent to BOTH
button again. The RIGHT audio channel will be sent to BOTH
button a third time and the MONO track will be sent to BOTH
will not appear on the VCR display.
button a fourth time, normal Hi-Fi stereo sound will be
button to display the
] menu select buttons to
SET
SET
button to
button to confirm and return to the main menu screen.
button to exit to normal screen.
www.sharp.co.uk/support
18
➝N I CAM
CO L OUR
VCR CHANNEL
AU T O O F F
AU T O P A L
/ buttons.