Advanced Operation Audio And Your Vcr (Hi-Fi Vcr's Only) - Sharp SHOWVIEW VC-MH711GM Operation Manual

ADVANCED OPERATION
AUDIO AND YOUR VCR (HI-FI VCR'S ONLY)
HI-FI STEREO SOUND
Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
AUDIO OUT
use the AUDIO OUT
• Press AUDIO OUT
appear on the VCR display.
• Press AUDIO OUT
appear on the VCR display.
• Press AUDIO OUT
will disappear from the VCR display.
• Pressing AUDIO OUT
appear on the VCR display.
IGR HI-FI STEREO SOUND
Your VCR can receive and record IGR sound. The VCR is normally set so that IGR sound is
possible if it is present on the receiving signal, otherwise the VCR will automatically switch to
receive the mono signal.
NOTES:
• If the tape being played back does not carry sound recorded on Hi-Fi tracks,
will not appear on the display.
• lf the sound contains 'crackling' or 'popping' noises the sound quality may be
improved by adjusting the tracking using CHANNEL
• If the poor quality is for a long period the VCR will automatically select the mono track
and the sound will be in mono.
Downloaded from: http://www.usersmanualguide.com/
button on the remote control. If you wish to change the sound output you can
button as follows:
once. The LEFT audio channel will be sent to BOTH speakers.
twice. The RIGHT audio channel will be sent to BOTH speakers.
three times. The MONO track will be sent to BOTH speakers.
a fourth time, normal Hi-Fi stereo sound will be heard.
K L
/ .
16
L will
R will
L and R
L and R will
L and R