Advanced Operation Audio And Your Vcr - Sharp VC-FH70GM Operation Manual

ADVANCED OPERATION
AUDIO AND YOUR VCR
HI-FI STEREO SOUND
Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
AUDIO OUT button on the remote control. If you wish to change the sound output you can
AUDIO OUT
use the
• Press AUDIO OUT
appear on the VCR display.
AUDIO OUT
• Press
appear on the VCR display.
AUDIO OUT
• Press
will disappear from the VCR display.
AUDIO OUT
• Pressing
appear on the VCR display.
NICAM/IGR Hi-Fi STEREO SOUND
Your VCR can receive and record programmes broadcast in NICAM or IGR sound (the factory
preset condition for NICAM is AUTO). NICAM or IGR sound may not be stereo, this depends on
the programme being received.
Audio is automatically recorded in two different ways:
(i) Hi-Fi: Using specialised rotary heads, two audio signals are recorded on to the tape. These
will be stereo, mono or bilingual depending on the sound being received.
(ii) Normal: A mono recording is also made on the conventional analogue audio track.
1.
MENU
Press to display the main menu on the
screen.
2.
Press [ /
3.
Press SET . NICAM will be selected.
4.
[ / ] to select OFF.
Press
5.
Press SET , to return to the menu screen.
6.
Press MENU , to exit to normal screen.
NOTES:
• If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R
will not appear on the display.
• if the sound contains 'crackling' or 'popping' noises the sound quality may be
improved by adjusting the tracking using CHANNEL
• If the poor quality is for a long period the VCR will automatically select the mono track
and the sound will be in mono.
• Not all TV transmitters provide NICAM or IGR sound. In this case the VCR automatically
switches to receive the mono signal.
• NICAM sound may not be stereo.
button as follows:
once. The LEFT audio channel will be sent to BOTH speakers.
twice. The RIGHT audio channel will be sent to BOTH speakers.
three times. The MONO track will be sent to BOTH speakers.
a fourth time, normal Hi-Fi stereo sound will be heard.
] to select MODE.
➝N I CAM
CO L OUR
/
GB-19
L
L
and
L
and
AU T O O F F
AU T O P A L ME S E CAM
.
will
R
will
R
R
will