Phonak ComPilot II User Manual page 51

Causes
J The surrounding noise may
be too loud.
ComPilot II is unresponsive or there are no light indicators when
switching on.
J ComPilot II battery may
be dead.
J It may indicate a software
problem.
The operating time of your ComPilot II is reduced substantially.
J The battery typically needs
several charging cycles to
achieve full performance.
What to do
J Although ComPilot II features
noise reduction technologies,
very noisy environments
should be avoided.
J Suggest to your callers that
they increase the phone
volume.
J Charge your ComPilot II for
at least 1 hour.
J Unplug any connectors from
ComPilot II.
J Switch ComPilot II Off and
On again.
J Consider resetting ComPilot II.
J Charge for at least 3 hours
the first time you charge
ComPilot II.
J Let a new ComPilot II
discharge completely three
times.
51