Scrolling Through Lists (Vertical Scrolling) - Gigaset SL910 Manual

L
<
1
4
7
¤
If you want to activate a service function, press and hold (for approximately
2 seconds) the following icons relating to the numbers:
A D G B 3 F E 9 H.
¤
A number field opens, which you can use to enter a function-specific code.

Scrolling through lists (vertical scrolling)

If lists (not submenus) are longer than the display, i.e., if it is not possible for all the
list entries to be displayed at once, then a drop shadow on the lower and/or upper
edge of the display indicates the direction you have to scroll in to view more of the
list.
You have to scroll vertically through lists:
¤
Drag from bottom to top over the display to scroll down in the list (i.e., it appears
as if you are pushing the section currently visible upwards out of the display so
that the bottom section appears in the display).
¤
Drag from top to bottom over the display to scroll upwards in the list.
As soon as you scroll in a list, a scroll bar is displayed on the right side of the display.
This shows the size and position of the visible section of the list.
Scrolling through lists is not continuous, i.e., you have to scroll back to return to the
top from the end of the list.
Settings
Ä Å
>
2
3
5 6
8
9
i.e.:
á ï
Date + Audio
Time Settings
= =
2
1
etc.
The numbers are not shown in the
display! They were positioned here
above the menu icons for better
understanding.
Using the phone
i
Display +
Keypad
=
3
23