8
124
Insert plug 3.
z
Install high-beam headlight
cover 1 or low-beam headlight
cover 2 by turning clockwise.
Make sure the word TOP is
pointing up.
Replacing parking light
bulb
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Turn handlebars to the right.
Remove bulb holder 1 from
headlight housing.
Pull bulb out of socket.
Replace defective bulb.
Do not touch the glass of
new bulbs with your fin-
gers. For installation, use a clean,
dry cloth. Dirt deposits, in par-
ticular oil and grease, interfere
with heat radiation from the bulb.
Overheating and therefore short
service life of the bulbs are the
consequence.
Bulb for parking light
W5W / 12 V / 5 W