Starting - Joyner JNSZ800DL Owner's Manual

bolt 2 with thread glue.
(See Fig. 7)
G. Break-in
The first month is most important in the life of your vehicle. Proper operation during
this break-in period will help assure maximum life and performance from your new
vehicle. The following guidelines explain proper break-in procedures.
1. After the engine starts, the engine is not allowed in high speed in the neutral gearshift.
2. Drive vehicle from stop to low speed slowly.
3. Avoid braking strongly.
4. Do not exceed the vehicle speed on the below schedule
The speed of vehicle
Max speed in each gear
H. Starting And Operating Instructions
a. Before starting the engine, be sure that the driver is seated properly in the ATV and
tighten the seatbelt.
b. Testing the ATV in a open place at the beginning to learn how to start, turn and
stop.
c. Operate the ATV slowly until you are familiar with it.
d. The turning radius of this ATV is small and agile, so the centrifugal force is very
high when turning at high speed. Slow down to a more controllable speed when turning
to prevent the ATV from rolling over.
e. To prevent vehicle from rolling over, be sure to only turn the vehicle at a slow more
controllable speed.
Fig. 7
The first 1000 km
1st Gear
2nd Gear
3rd Gear
4th Gear
21
25km/h
45km/h
70 km/h
100km/h
OPERATION