(See Fig. 34, 35).
Fig. 34
11. Fix pressure plate of clutch. Two bolts with "Y.G" mark must be inserted into two
anchor hole (See Fig. 36) . Tighten six bolts with torque 30 N.m (See Fig. 37)
Fig. 36
12. Fix upper mud plate (See Fig. 38, 39)
Fig. 38
13. Fix parts according to reverse operation to the disassembly
D. Front Wheel Alignment
1. Put the vehicle on level ground.
2. The "toe-in" of the front wheels should be 0.9 inches. To check for alignment,
Fig. 35
Fig. 37
Fig. 39
32