Joyner JNSZ800DL Owner's Manual page 72

Figure 9
Figure 11
a. With the engine warm, put the vehicle on the level ground.
b. Shut down the engine, put a collecting oil plate under the engine oil outlet. Loosen
the oil outlet plug in the warm engine. Let the engine oil out fully (see Fig. 9).
c. Tighten the engine oil outlet plug.
d. Remove the oil filler cap (see Fig. 10), fill oil (SE 15W/40 or SF 15W/40) about
3.5 liters to the engine.
e. Pull out the engine oil dip stick (see Fig. 11), confirm the corrective oil level in the
crankcase (see Fig. 12).
Figure 10
SERVICE INSTRUCTIONS
23
Figure 12